Lubricated rotary screw compressor
Sullair LS190
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,360 cfm100 psig (≈ 6.9 bar)
- Power
- 250 hp190 kW
- Type
- Fixed speed
- Manufacturer
- Sullair
- Line
- LS Series
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- « ASME and CRN approved »
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 1,360 cfm | ≈ 38.51 m³/min |
| 110 psig (≈ 7.6 bar) | 1,300 cfm | ≈ 36.81 m³/min |
| 125 psig (≈ 8.6 bar) | 1,240 cfm | ≈ 35.11 m³/min |
| 150 psig (≈ 10.3 bar) | 1,060 cfm | ≈ 30.02 m³/min |
| 200 psig (≈ 13.8 bar) | 960 cfm | ≈ 27.18 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 200 | 1,340 cfm | 7 bar (≈ 102 psig) | 250 hp | Worldwide |
| Gardner Denver L200 | 1,338 acfm | 110 psig (≈ 7.6 bar) | 270 hp | Worldwide |
| Kaeser ESD 375 | ≈ 1,336.7 cfm | 7.5 bar (≈ 109 psig) | ≈ 268 hp | Worldwide |
| Sullivan-Palatek SP25-300 | 1,385.1 acfm | 100 psig (≈ 6.9 bar) | 300 hp | North America |
| Atlas Copco GA 200 Xtreme | 1,310.1 cfm | 7 bar (≈ 102 psig) | 268 hp | Worldwide |
| ALUP LARGO 201 | 1,384 cfm | 7 bar (≈ 102 psig) | 270 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other LS Series models
Is your product missing?
Request received. We will proceed within 72 hours.