Desiccant dryer
Nano Purification HL 1690
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 1,695 SCFM2,880 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (optional -70 °C)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Nano Purification
- Line
- D5 HL
- Conditions
- FAD 7 bar, inlet 35 °C, ambient 25 °C
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Parker MPX112 | 1,657 SCFM2,815 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 3200 | 1,750 SCFM3,200 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Van Air Systems HL-1750 | 1,750 SCFM2,814 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Altec AIR MHR1600 | 1,600 SCFM≈ 2,718 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL1800 | 1,800 SCFM3,060 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-1800 | 1,800 SCFM≈ 3,058 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL1800 | 1,800 SCFM3,060 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL1800 | 1,800 SCFM3,060 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other D5 HL models
Is your product missing?
Request received. We will proceed within 72 hours.