Desiccant dryer
Nano Purification HL 200
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 191 SCFM324 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (optional -70 °C)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Nano Purification
- Line
- D5 HL
- Conditions
- FAD 7 bar, inlet 35 °C, ambient 25 °C
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Atlas Copco CD 90+ | 191 SCFM324 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Pneumatic Products (SPX) 190CDA | 187 SCFM≈ 318 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Aircel AHLD-200 E | 200 SCFM≈ 340 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-0200-1 | 200 SCFM≈ 340 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCp 200 | 200 SCFM≈ 340 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL200 | 200 SCFM342 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-200 | 200 SCFM≈ 340 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL200 | 200 SCFM342 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other D5 HL models
Is your product missing?
Request received. We will proceed within 72 hours.