Desiccant dryer
Nano Purification HL 635
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 636 SCFM1,080 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (optional -70 °C)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Nano Purification
- Line
- D5 HL
- Conditions
- FAD 7 bar, inlet 35 °C, ambient 25 °C
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Pneumatech PH 635 HE | ≈ 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Atlas Copco CD 300+ | 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Quincy QHD-635 | 635 SCFM≈ 1,079 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Altec AIR HLD-0650-1 | 650 SCFM≈ 1,104 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCp 650 | 650 SCFM≈ 1,104 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPAD-650 | 650 SCFM≈ 1,104 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 650 | 650 SCFM≈ 1,104 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Sullivan-Palatek SPDPR 650 | 650 SCFM≈ 1,104 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other D5 HL models
Is your product missing?
Request received. We will proceed within 72 hours.