Desiccant dryer
Quincy QHD-635
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 635 SCFM≈ 1,079 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F or -100 °F
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Quincy
- Line
- QHD
- Conditions
- @100 psig
- Voltage
- 115/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Nano Purification HL 635 | ≈ 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatech PH 635 HE | ≈ 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Atlas Copco CD 300+ | 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Altec AIR HLD-0650-1 | 650 SCFM≈ 1,104 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCp 650 | 650 SCFM≈ 1,104 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPAD-650 | 650 SCFM≈ 1,104 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 650 | 650 SCFM≈ 1,104 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Sullivan-Palatek SPDPR 650 | 650 SCFM≈ 1,104 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other QHD models
Is your product missing?
Request received. We will proceed within 72 hours.