Desiccant dryer
Quincy QHD-390
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 390 SCFM≈ 663 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F or -100 °F
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Quincy
- Line
- QHD
- Conditions
- @100 psig
- Voltage
- 115/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Pneumatech PH 390 HE | ≈ 392 SCFM666 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Atlas Copco CD 185+ | 392 SCFM666 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Pneumatic Products (SPX) 400CDA | 395 SCFM≈ 671 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Nano Purification HL 380 | ≈ 381 SCFM648 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR HLD-0400-1 | 400 SCFM≈ 680 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Champion XCHL400 | 400 SCFM678 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-400 | 400 SCFM≈ 680 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL400 | 400 SCFM678 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other QHD models
Is your product missing?
Request received. We will proceed within 72 hours.