Desiccant dryer
Atlas Copco CD 185+
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 392 SCFM666 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -70 °C or -40 °C (optional)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Atlas Copco
- Line
- CD+ 110-300
- Conditions
- FAD 7 bar(e)/100 psig
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Pneumatech PH 390 HE | ≈ 392 SCFM666 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Quincy QHD-390 | 390 SCFM≈ 663 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Pneumatic Products (SPX) 400CDA | 395 SCFM≈ 671 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Altec AIR HLD-0400-1 | 400 SCFM≈ 680 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCp 400 | 400 SCFM≈ 680 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL400 | 400 SCFM678 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-400 | 400 SCFM≈ 680 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL400 | 400 SCFM678 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CD+ 110-300 models
Is your product missing?
Request received. We will proceed within 72 hours.