Desiccant dryer
Altec AIR MHR1600
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,600 SCFM≈ 2,718 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F/C or -100 °F (selectable)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Altec AIR
- Line
- MHR
- Voltage
- 115/1/50-60
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Hankison HHL 2701 | ≈ 1,589 SCFM2,700 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Hertz Kompressoren HDA 2700 | 1,589 SCFM2,700 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Champion CDT1550 | 1,550 SCFM≈ 2,633 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Gardner Denver DGH1550 | 1,550 SCFM≈ 2,633 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
| Kaeser KAD 1550 | 1,550 SCFM≈ 2,633 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
| Parker MPX112 | 1,657 SCFM2,815 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification HL 1690 | ≈ 1,695 SCFM2,880 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Aircel AHLD-1500 E | 1,500 SCFM≈ 2,549 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other MHR models
Is your product missing?
Request received. We will proceed within 72 hours.