Desiccant dryer
Van Air Systems HL-1750
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,750 SCFM2,814 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (-100 °F: factor 0.8)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Van Air Systems
- Line
- HL
- Conditions
- @100 psig (6.9 barg), 100 °F, 100 % HR
- Voltage
- 115/1/50-60 (optional 220/1/50-60)
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mikropor MDA 3200 | 1,750 SCFM3,200 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Champion XCHL1800 | 1,800 SCFM3,060 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-1800 | 1,800 SCFM≈ 3,058 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL1800 | 1,800 SCFM3,060 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL1800 | 1,800 SCFM3,060 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| ZEKS 1800ZPB | 1,800 SCFM≈ 3,058 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Quincy QHD-1800 | 1,801 SCFM≈ 3,060 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Nano Purification HL 1690 | ≈ 1,695 SCFM2,880 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HL models
Is your product missing?
Request received. We will proceed within 72 hours.