Desiccant dryer
Van Air Systems HL-2000
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 2,000 SCFM3,216 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (-100 °F: factor 0.8)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Van Air Systems
- Line
- HL
- Conditions
- @100 psig (6.9 barg), 100 °F, 100 % HR
- Voltage
- 115/1/50-60 (optional 220/1/50-60)
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-2000 E | 2,000 SCFM≈ 3,398 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-2000-1 | 2,000 SCFM≈ 3,398 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Mattei MHL 2000 | 2,000 SCFM≈ 3,398 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 3600 | 2,000 SCFM3,600 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification HL 2060 | ≈ 2,055 SCFM3,492 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Ingersoll Rand D3300ILA | ≈ 1,942 SCFM3,300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| OMI HLA 3300 Pro | 1,942 SCFM3,300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| BEKO Technologies XCp 1900 | 1,900 SCFM≈ 3,228 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HL models
Is your product missing?
Request received. We will proceed within 72 hours.