Desiccant dryer
OMI HLA 3300 Pro
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,942 SCFM3,300 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C/-40 °F (optional -70 °C/-100 °F)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- OMI
- Line
- HLA PRO
- Conditions
- FAD 20 °C, 1 bar
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Ingersoll Rand D3300ILA | ≈ 1,942 SCFM3,300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| BEKO Technologies XCp 1900 | 1,900 SCFM≈ 3,228 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Sullivan-Palatek SPDPR 1900 | 1,900 SCFM≈ 3,228 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Aircel AHLD-2000 E | 2,000 SCFM≈ 3,398 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-2000-1 | 2,000 SCFM≈ 3,398 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Mattei MHL 2000 | 2,000 SCFM≈ 3,398 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 3600 | 2,000 SCFM3,600 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Van Air Systems HL-2000 | 2,000 SCFM3,216 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HLA PRO models
Is your product missing?
Request received. We will proceed within 72 hours.