Desiccant dryer
OMI HLA 2000 Pro
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,177 SCFM2,000 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C/-40 °F (optional -70 °C/-100 °F)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- OMI
- Line
- HLA PRO
- Conditions
- FAD 20 °C, 1 bar
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Ingersoll Rand D2000ILA | ≈ 1,177 SCFM2,000 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR MHR1200 | 1,200 SCFM≈ 2,039 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| BEKO Technologies XCp 1200 | 1,200 SCFM≈ 2,039 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL1200 | 1,200 SCFM2,040 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Gardner Denver XGHL1200 | 1,200 SCFM2,040 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Parker MX108 | 1,200 SCFM2,040 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Pneumatic Products (SPX) 1200CDA | 1,200 SCFM≈ 2,039 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Sullivan-Palatek SPDPR 1200 | 1,200 SCFM≈ 2,039 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HLA PRO models
Is your product missing?
Request received. We will proceed within 72 hours.