Desiccant dryer
MTA NDA-M25
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 11 SCFM19 m³/h
- Dew point
- -60 °C (-76 °F)As published: -60 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| FINI HDT 3 | 11 SCFM19.2 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| ALUP AD 18 | ≈ 10 SCFM17 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| BEKO Technologies AC 126 | ≈ 10 SCFM17 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
| Worthington Creyssensac DB 2 C | ≈ 10 SCFM17 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| MARK ADS 3 | 10 SCFM17 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Mattei DD 30 | 10 SCFM18 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Donaldson Ultrapac 2000 0015 | ≈ 9 SCFM15 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| OMI HL 0030 | 11 SCFM18 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NDA (molecular sieve) models
Is your product missing?
Request received. We will proceed within 72 hours.