Desiccant dryer
MTA NDA-013
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 796 SCFM1,353 m³/h
- Dew point
- -60 °C (-76 °F)As published: -60 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Kaeser i.DC 225 | ≈ 795 SCFM1,350 m³/h | -70 to 3 °C (-94 to 37.4 °F) | Class 2 | Europe / international |
| CompAir AX235NS | 828 SCFM1,407 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
| MARK ADS 180 (14.5 bar) | 763 SCFM1,296 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
| ALUP AD 1080 14.5 bar | ≈ 763 SCFM1,296 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Worthington Creyssensac DB 110 C | ≈ 763 SCFM1,296 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| FINI HDT 200 | 724 SCFM1,230 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Hankison HHL 1351 | ≈ 795 SCFM1,350 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR HLD-0800-1 | 800 SCFM≈ 1,359 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NDA (molecular sieve) models
Is your product missing?
Request received. We will proceed within 72 hours.