Desiccant dryer
MTA NDA-014
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 972 SCFM1,652 m³/h
- Dew point
- -60 °C (-76 °F)As published: -60 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Kaeser i.DC 275 | ≈ 971 SCFM1,650 m³/h | -70 to 3 °C (-94 to 37.4 °F) | Class 2 | Europe / international |
| CompAir AX267TL | ≈ 942 SCFM1,600 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| ALUP AD 1300 14.5 bar | ≈ 911 SCFM1,548 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Worthington Creyssensac DB 130 C | ≈ 911 SCFM1,548 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| MARK ADS 215 (14.5 bar) | 911 SCFM1,548 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
| FINI HDT 250 | 901 SCFM1,530 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Hankison HHL 1651 | ≈ 971 SCFM1,650 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Aircel AHLD-1000 E | 1,000 SCFM≈ 1,699 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NDA (molecular sieve) models
Is your product missing?
Request received. We will proceed within 72 hours.