Desiccant dryer
MTA NDA-007
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 242 SCFM412 m³/h
- Dew point
- -60 °C (-76 °F)As published: -60 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Kaeser i.DC 67 | ≈ 237 SCFM402 m³/h | -70 to 3 °C (-94 to 37.4 °F) | Class 2 | Europe / international |
| CompAir AX67TF | ≈ 235 SCFM400 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| ALUP AD 400 | ≈ 233 SCFM396 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Worthington Creyssensac DB 400 | ≈ 233 SCFM396 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| MARK ADS 66 | 233 SCFM396 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Ultrafilter HL 375 | ≈ 221 SCFM375 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 3 (derived) | Europe / international |
| FINI HDT 75 | 265 SCFM450 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Mikropor MMD240 | 240 SCFM400 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NDA (molecular sieve) models
Is your product missing?
Request received. We will proceed within 72 hours.