Desiccant dryer
Ultrafilter HL 375
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 221 SCFM375 m³/h
- Dew point
- -70 to -20 °C (-94 to -4 °F)As published: -20 °C to -70 °C (by version)
- ISO 8573-1 class
- Classes 1, 3 (derived)
- Type
- Heatless
- Manufacturer
- Ultrafilter
- Line
- HeatLess HL
- Conditions
- Vnom ref. 20 °C/1 bar abs, 7 bar g, inlet 35 °C
- Voltage
- n/a (options 24 VDC, 110 VAC)
- Frequency
- n/a
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| BEKO Technologies AC 438 | ≈ 221 SCFM375 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| FINI HDT 60 | 219 SCFM372 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Mattei DD 2110 | 212 SCFM360 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| MARK ADS 66 | 233 SCFM396 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| ALUP AD 400 | ≈ 233 SCFM396 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Worthington Creyssensac DB 400 | ≈ 233 SCFM396 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| CompAir AX67TF | ≈ 235 SCFM400 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Mikropor MDA 360 | 215 SCFM360 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HeatLess HL models
Is your product missing?
Request received. We will proceed within 72 hours.