Desiccant dryer
MTA NDA-004
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 97 SCFM164 m³/h
- Dew point
- -60 °C (-76 °F)As published: -60 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| ALUP AD 160 | ≈ 95 SCFM162 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Worthington Creyssensac DB 160 | ≈ 95 SCFM162 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| MARK ADS 27 | 95 SCFM162 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Ultrafilter HL 175 | ≈ 103 SCFM175 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 3 (derived) | Europe / international |
| FINI HDT 25 | 88 SCFM150 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Pneumatic Products (SPX) 100CDA | 96 SCFM≈ 163 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Atlas Copco CD 45+ | 95 SCFM162 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Ingersoll Rand D160ILA | ≈ 94 SCFM160 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NDA (molecular sieve) models
Is your product missing?
Request received. We will proceed within 72 hours.