Desiccant dryer
Aircel AHLD-1000 E
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,000 SCFM≈ 1,699 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (CDP: -100 °F)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Aircel
- Line
- AHLD E-Series
- Conditions
- CAGI ADF 200 @100 psig/100 °F
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HLD-1000-1 | 1,000 SCFM≈ 1,699 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCp 1000 | 1,000 SCFM≈ 1,699 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL1000 | 1,000 SCFM1,698 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-1000 | 1,000 SCFM≈ 1,699 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL1000 | 1,000 SCFM1,698 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL1000 | 1,000 SCFM1,698 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 1000 | 1,000 SCFM≈ 1,699 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 1800 | 1,000 SCFM1,800 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other AHLD E-Series models
Is your product missing?
Request received. We will proceed within 72 hours.