Desiccant dryer
Aircel AHLD-350 E
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 350 SCFM≈ 595 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (CDP: -100 °F)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Aircel
- Line
- AHLD E-Series
- Conditions
- CAGI ADF 200 @100 psig/100 °F
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR MHR350 | 350 SCFM≈ 595 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Atlas Copco CD 165+ | 350 SCFM594 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Chicago Pneumatic CPAD-350 | 350 SCFM≈ 595 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 350 | 350 SCFM≈ 595 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MMD HC 340 | 340 SCFM575 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Parker MX103C | 360 SCFM612 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Hertz Kompressoren HDA 575 | 338 SCFM574.8 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Quincy QMOD00365 | 365 SCFM≈ 620 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other AHLD E-Series models
Is your product missing?
Request received. We will proceed within 72 hours.