Desiccant dryer
OMI HL 0030
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 11 SCFM18 m³/h
- Dew point
- -40 to -20 °C (-40 to -4 °F)As published: -20 ÷ -40 °C (-4 ÷ -40 °F)
- ISO 8573-1 class
- Class 2 to 3 (derived)
- Type
- Heatless
- Manufacturer
- OMI
- Line
- HL (low flow)
- Conditions
- FAD 20 °C, 1 bar
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Atlas Copco CD 5+ | 11.7 SCFM19.8 m³/h | -40 °C (-40 °F) | Class 2 | Worldwide |
| Altec AIR HR4 | 12 SCFM≈ 20 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 2 | North America |
| Chicago Pneumatic CPADM-10 | 10 SCFM≈ 17 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD10 | 10 SCFM20 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification NDL 030 | 10 SCFM≈ 17 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Parker DAS4 | 10 SCFM17 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Quincy QMOD00010 | 10 SCFM≈ 17 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Sullair DMD-10 | 10 SCFM≈ 17 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HL (low flow) models
Is your product missing?
Request received. We will proceed within 72 hours.