Desiccant dryer
OMI HL R012
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 4 SCFM7 m³/h
- Dew point
- -40 to -20 °C (-40 to -4 °F)As published: -20 ÷ -40 °C (-4 ÷ -40 °F)
- ISO 8573-1 class
- Class 2 to 3 (derived)
- Type
- Heatless
- Manufacturer
- OMI
- Line
- HL (low flow)
- Conditions
- FAD 20 °C, 1 bar
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| BEKO Technologies ACC 4 | 4 SCFM≈ 7 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Atlas Copco CD 2 | 4.2 SCFM7.2 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Altec AIR MDH6 | 3.2 SCFM≈ 5 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Chicago Pneumatic CPADM-5 | 5 SCFM≈ 8 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Deltech DHDM 3 | 3 SCFM≈ 5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 3 | 3 SCFM≈ 5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MMD3 | 3 SCFM5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification NDL 010 | 3 SCFM≈ 5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HL (low flow) models
Is your product missing?
Request received. We will proceed within 72 hours.