Desiccant dryer
BEKO Technologies ACH 575
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 575 SCFM≈ 977 m³/h
- Dew point
- -62.2 to -40 °C (-80 to -40 °F)As published: -40 °F std / -80 °F optional
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT ACH
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-0550-4 | 550 SCFM≈ 934 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP600 | 600 SCFM1,020 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-600 | 600 SCFM≈ 1,019 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD600 | 600 SCFM1,019 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH600 | 600 SCFM1,020 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 600 | 600 SCFM≈ 1,019 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Sullair SAH600 | 600 SCFM≈ 1,019 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Sullivan-Palatek SPDH 600 | 600 SCFM≈ 1,019 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT ACH models
Is your product missing?
Request received. We will proceed within 72 hours.