Desiccant dryer
BEKO Technologies ACH 180
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 180 SCFM≈ 306 m³/h
- Dew point
- -62.2 to -40 °C (-80 to -40 °F)As published: -40 °F std / -80 °F optional
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT ACH
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei MEH 175 | 175 SCFM≈ 297 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HRE-0200-2 | 200 SCFM≈ 340 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP200 | 200 SCFM342 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand EH200 | 200 SCFM342 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Sullivan-Palatek SPDH 200 | 200 SCFM≈ 340 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Nano Purification EH 0150 | 150 SCFM≈ 255 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| MTA NST 45 | ≈ 171 SCFM290 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT ACH models
Is your product missing?
Request received. We will proceed within 72 hours.