Desiccant dryer
MTA NST 45
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 171 SCFM290 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C (alumina); molecular sieve on request
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- MTA
- Line
- DryXtreme NST
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei MEH 175 | 175 SCFM≈ 297 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| BEKO Technologies ACH 180 | 180 SCFM≈ 306 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Champion XCHP150 | 150 SCFM252 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand EH150 | 150 SCFM252 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Nano Purification EH 0150 | 150 SCFM≈ 255 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Sullivan-Palatek SPDH 150 | 150 SCFM≈ 255 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Altec AIR HRE-0200-2 | 200 SCFM≈ 340 m³/h | -40 °C (-40 °F) | Class 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NST models
Is your product missing?
Request received. We will proceed within 72 hours.