Desiccant dryer
Champion XCHP150
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 150 SCFM252 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F / -40 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- Champion
- Line
- XCHP
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Ingersoll Rand EH150 | 150 SCFM252 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Nano Purification EH 0150 | 150 SCFM≈ 255 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Sullivan-Palatek SPDH 150 | 150 SCFM≈ 255 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Altec AIR HRE-0130-1 | 130 SCFM≈ 221 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| BEKO Technologies ACH 130 | 130 SCFM≈ 221 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Mattei MEH 175 | 175 SCFM≈ 297 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| MTA NST 45 | ≈ 171 SCFM290 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other XCHP models
Is your product missing?
Request received. We will proceed within 72 hours.