Desiccant dryer
BEKO Technologies ACH 1725
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,725 SCFM≈ 2,931 m³/h
- Dew point
- -62.2 to -40 °C (-80 to -40 °F)As published: -40 °F std / -80 °F optional
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT ACH
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei MEH 1700 | 1,700 SCFM≈ 2,888 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Quincy QHP-1700 | 1,700 SCFM≈ 2,888 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHP1800 | 1,800 SCFM3,060 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-1800 | 1,800 SCFM≈ 3,058 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD1800 | 1,800 SCFM3,058 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH1800 | 1,800 SCFM3,060 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 1800 | 1,800 SCFM≈ 3,058 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Sullivan-Palatek SPDH 1800 | 1,800 SCFM≈ 3,058 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT ACH models
Is your product missing?
Request received. We will proceed within 72 hours.