Desiccant dryer
Sullivan-Palatek SPDH 1800
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,800 SCFM≈ 3,058 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- Sullivan-Palatek
- Voltage
- 460 VAC/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- cUL (controls)
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Champion XCHP1800 | 1,800 SCFM3,060 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-1800 | 1,800 SCFM≈ 3,058 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD1800 | 1,800 SCFM3,058 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH1800 | 1,800 SCFM3,060 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 1800 | 1,800 SCFM≈ 3,058 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Nano Purification EH 850 | ≈ 1,801 SCFM3,060 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| BEKO Technologies ACH 1725 | 1,725 SCFM≈ 2,931 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Mattei MEH 1700 | 1,700 SCFM≈ 2,888 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPDH Pro Heated Purge models
Is your product missing?
Request received. We will proceed within 72 hours.