Desiccant dryer
Sullivan-Palatek SPDH 800
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 800 SCFM≈ 1,359 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- Sullivan-Palatek
- Voltage
- 460 VAC/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- cUL (controls)
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-0800-4 | 800 SCFM≈ 1,359 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP800 | 800 SCFM1,362 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand EH800 | 800 SCFM1,362 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Sullair SAH800 | 800 SCFM≈ 1,359 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Atlas Copco AD 360 | 763 SCFM1,296 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Nano Purification EH 400 | ≈ 848 SCFM1,440 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Deltech RP-750 | 750 SCFM≈ 1,274 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD750 | 750 SCFM1,274 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPDH Pro Heated Purge models
Is your product missing?
Request received. We will proceed within 72 hours.