Desiccant dryer
Sullivan-Palatek SPDH 1000
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,000 SCFM≈ 1,699 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- Sullivan-Palatek
- Voltage
- 460 VAC/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- cUL (controls)
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-1000-4 | 1,000 SCFM≈ 1,699 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP1000 | 1,000 SCFM1,698 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand EH1000 | 1,000 SCFM1,698 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Mattei MEH 1000 | 1,000 SCFM≈ 1,699 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification EH 1000 | 1,000 SCFM≈ 1,699 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Sullair SAH1000 | 1,000 SCFM≈ 1,699 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| BEKO Technologies ACH 1010 | 1,010 SCFM≈ 1,716 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Atlas Copco AD 480 | 1,018 SCFM1,728 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPDH Pro Heated Purge models
Is your product missing?
Request received. We will proceed within 72 hours.