Desiccant dryer
BEKO Technologies ACH 460
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 460 SCFM≈ 782 m³/h
- Dew point
- -62.2 to -40 °C (-80 to -40 °F)As published: -40 °F std / -80 °F optional
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT ACH
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Champion XCHP500 | 500 SCFM852 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-500 | 500 SCFM≈ 850 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD500 | 500 SCFM850 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH500 | 500 SCFM852 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 500 | 500 SCFM≈ 850 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Mattei MEH 500 | 500 SCFM≈ 850 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification EH 0500 | 500 SCFM≈ 850 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Sullair SAH500 | 500 SCFM≈ 850 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT ACH models
Is your product missing?
Request received. We will proceed within 72 hours.