Desiccant dryer
BEKO Technologies ACH 2350
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 2,350 SCFM≈ 3,993 m³/h
- Dew point
- -62.2 to -40 °C (-80 to -40 °F)As published: -40 °F std / -80 °F optional
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT ACH
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Nano Purification EH 1100 | ≈ 2,331 SCFM3,960 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Mattei MEH 2400 | 2,400 SCFM≈ 4,078 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HRE-2500-4 | 2,500 SCFM≈ 4,248 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Deltech RP-2200 | 2,200 SCFM≈ 3,738 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD2200 | 2,200 SCFM3,738 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Kaeser KED 2200 | 2,200 SCFM≈ 3,738 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Sullivan-Palatek SPDH 2500 | 2,500 SCFM≈ 4,248 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHP2100 | 2,100 SCFM3,570 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT ACH models
Is your product missing?
Request received. We will proceed within 72 hours.