Desiccant dryer
Altec AIR HRE-0550-4
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 550 SCFM≈ 934 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/C (class 2)
- ISO 8573-1 class
- Class 2
- Type
- Heated purge
- Manufacturer
- Altec AIR
- Line
- HRE
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| BEKO Technologies ACH 575 | 575 SCFM≈ 977 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Champion XCHP500 | 500 SCFM852 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-500 | 500 SCFM≈ 850 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD500 | 500 SCFM850 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH500 | 500 SCFM852 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 500 | 500 SCFM≈ 850 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Mattei MEH 500 | 500 SCFM≈ 850 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification EH 0500 | 500 SCFM≈ 850 m³/h | -40 °C (-40 °F) | Class 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HRE models
Is your product missing?
Request received. We will proceed within 72 hours.