Desiccant dryer
Altec AIR HRE-0400-4
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 400 SCFM≈ 680 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/C (class 2)
- ISO 8573-1 class
- Class 2
- Type
- Heated purge
- Manufacturer
- Altec AIR
- Line
- HRE
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Champion XCHP400 | 400 SCFM678 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-400 | 400 SCFM≈ 680 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD400 | 400 SCFM680 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH400 | 400 SCFM678 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 400 | 400 SCFM≈ 680 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Sullivan-Palatek SPDH 400 | 400 SCFM≈ 680 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| BEKO Technologies ACH 355 | 355 SCFM≈ 603 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Mattei MEH 350 | 350 SCFM≈ 595 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HRE models
Is your product missing?
Request received. We will proceed within 72 hours.