Desiccant dryer
Altec AIR HRE-1250-4
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,250 SCFM≈ 2,124 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/C (class 2)
- ISO 8573-1 class
- Class 2
- Type
- Heated purge
- Manufacturer
- Altec AIR
- Line
- HRE
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Nano Purification EH 1250 | 1,250 SCFM≈ 2,124 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Quincy QHP-1220 | 1,220 SCFM≈ 2,073 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| BEKO Technologies ACH 1300 | 1,300 SCFM≈ 2,209 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Champion XCHP1200 | 1,200 SCFM2,040 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-1300 | 1,300 SCFM≈ 2,209 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD1300 | 1,300 SCFM2,209 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH1200 | 1,200 SCFM2,040 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 1300 | 1,300 SCFM≈ 2,209 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HRE models
Is your product missing?
Request received. We will proceed within 72 hours.