Desiccant dryer
Altec AIR HRE-6000-4
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 6,000 SCFM≈ 10,194 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/C (class 2)
- ISO 8573-1 class
- Class 2
- Type
- Heated purge
- Manufacturer
- Altec AIR
- Line
- HRE
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Ingersoll Rand EH6000 | 6,000 SCFM10,194 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Nano Purification EH 3000 | ≈ 6,357 SCFM10,800 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Mattei MEH 5000 | 5,000 SCFM≈ 8,495 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| MTA NST 1380 | ≈ 5,240 SCFM8,903 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HRE models
Is your product missing?
Request received. We will proceed within 72 hours.