Desiccant dryer
Altec AIR HRE-0650-4
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 650 SCFM≈ 1,104 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/C (class 2)
- ISO 8573-1 class
- Class 2
- Type
- Heated purge
- Manufacturer
- Altec AIR
- Line
- HRE
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Nano Purification EH 330 | ≈ 699 SCFM1,188 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Champion XCHP600 | 600 SCFM1,020 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-600 | 600 SCFM≈ 1,019 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD600 | 600 SCFM1,019 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH600 | 600 SCFM1,020 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 600 | 600 SCFM≈ 1,019 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Mattei MEH 700 | 700 SCFM≈ 1,189 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Sullair SAH600 | 600 SCFM≈ 1,019 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HRE models
Is your product missing?
Request received. We will proceed within 72 hours.