Desiccant dryer
Altec AIR HRE-5000-4
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 5,000 SCFM≈ 8,495 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/C (class 2)
- ISO 8573-1 class
- Class 2
- Type
- Heated purge
- Manufacturer
- Altec AIR
- Line
- HRE
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Ingersoll Rand EH5000 | 5,000 SCFM8,496 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Mattei MEH 5000 | 5,000 SCFM≈ 8,495 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification EH 2200 | ≈ 4,662 SCFM7,920 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| BEKO Technologies ACH 4050 | 4,050 SCFM≈ 6,881 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| MTA NST 1380 | ≈ 5,240 SCFM8,903 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HRE models
Is your product missing?
Request received. We will proceed within 72 hours.