Desiccant dryer
BEKO Technologies ACH 130
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 130 SCFM≈ 221 m³/h
- Dew point
- -62.2 to -40 °C (-80 to -40 °F)As published: -40 °F std / -80 °F optional
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT ACH
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-0130-1 | 130 SCFM≈ 221 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP150 | 150 SCFM252 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand EH150 | 150 SCFM252 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Nano Purification EH 0150 | 150 SCFM≈ 255 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Sullivan-Palatek SPDH 150 | 150 SCFM≈ 255 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Mattei MEH 100 | 100 SCFM≈ 170 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| MTA NST 30 | ≈ 114 SCFM193 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT ACH models
Is your product missing?
Request received. We will proceed within 72 hours.