Lubricated rotary screw compressor

Sullair LS90V

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 625 cfm110 psig (≈ 7.6 bar)
Power: 125 hp90 kW
Type: Variable speed (VSD)
Manufacturer: Sullair
Line: LS Series
Stages: 1
Cooling: Air, or water depending on version
Voltage: n/a
Frequency: 60 Hz
Brochure market: North America
CSA: n/a
CRN: « ASME and CRN approved »
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
110 psig (≈ 7.6 bar)	625 cfm	≈ 17.7 m³/min
125 psig (≈ 8.6 bar)	594 cfm	≈ 16.82 m³/min
150 psig (≈ 10.3 bar)	512 cfm	≈ 14.5 m³/min
175 psig (≈ 12.1 bar)	459 cfm	≈ 13 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
ELGi EG 90SP (VSD)	287 to 605 cfm	8 bar (≈ 116 psig)	125 hp	Worldwide
Kaeser CSDX 175 SFC	≈ 135.3 to 604.2 cfm	7.5 bar (≈ 109 psig)	≈ 121 hp	Worldwide
Atlas Copco GA 110 VSD+ 8.5 bar (125 psi)	206 to 727 cfm	132 psig (≈ 9.1 bar)	150 hp	Worldwide
ALUP ALLEGRO 110	≈ 194.9 to 652.6 cfm	8 bar (≈ 116 psig)	150 hp	Europe / international
FINI K-MAX TS 90-08 VS	222 to 675 cfm	8 bar (≈ 116 psig)	≈ 121 hp	Europe / international

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other LS Series models

Is your product missing?