Lubricated rotary screw compressor
Sullair LS110V
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 743 cfm110 psig (≈ 7.6 bar)
- Power
- 150 hp110 kW
- Type
- Variable speed (VSD)
- Manufacturer
- Sullair
- Line
- LS Series
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- « ASME and CRN approved »
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 743 cfm | ≈ 21.04 m³/min |
| 125 psig (≈ 8.6 bar) | 702 cfm | ≈ 19.88 m³/min |
| 150 psig (≈ 10.3 bar) | 617 cfm | ≈ 17.47 m³/min |
| 175 psig (≈ 12.1 bar) | 559 cfm | ≈ 15.83 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser DSD 205 SFC | ≈ 157.2 to 749.4 cfm | 7.5 bar (≈ 109 psig) | ≈ 147 hp | Worldwide |
| ELGi EG 110SP (VSD) | 282 to 728 cfm | 8 bar (≈ 116 psig) | 150 hp | Worldwide |
| Atlas Copco GA 110 VSD+ 8.5 bar (125 psi) | 206 to 727 cfm | 132 psig (≈ 9.1 bar) | 150 hp | Worldwide |
| FINI K-MAX TS 110-08 VS | 262 to 795 cfm | 8 bar (≈ 116 psig) | ≈ 147 hp | Europe / international |
| ALUP ALLEGRO 110 | ≈ 194.9 to 652.6 cfm | 8 bar (≈ 116 psig) | 150 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other LS Series models
Is your product missing?
Request received. We will proceed within 72 hours.