Lubricated rotary screw compressor
Gardner Denver L290
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,616.7 acfm110 psig (≈ 7.6 bar)
- Power
- 390 hp290 kW
- Type
- Fixed speed
- Manufacturer
- Gardner Denver
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 1,616.7 acfm | ≈ 45.78 m³/min |
| 145 psig (≈ 10 bar) | 1,262 acfm | ≈ 35.74 m³/min |
| 190 psig (≈ 13.1 bar) | 1,244.3 acfm | ≈ 35.23 m³/min |
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 1,663.3 acfm | ≈ 47.1 m³/min |
| 145 psig (≈ 10 bar) | 1,466.6 acfm | ≈ 41.53 m³/min |
| 190 psig (≈ 13.1 bar) | 1,286.9 acfm | ≈ 36.44 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Kaeser FSD 350 | 1,596 cfm | 125 psig (≈ 8.6 bar) | n/a | North America |
| Atlas Copco GA 250 | 1,677 cfm | 125 psig (≈ 8.6 bar) | ≈ 354 hp | Worldwide |
| Sullair LS220 | 1,530 cfm | 110 psig (≈ 7.6 bar) | 300 hp | North America |
| ELGi EG 250 | 1,475 cfm | 8 bar (≈ 116 psig) | 300 hp | Worldwide |
| Sullivan-Palatek SP25-350 | 1,380.2 acfm | 125 psig (≈ 8.6 bar) | 350 hp | North America |
| ALUP LARGO 251 | 1,494 cfm | 8 bar (≈ 116 psig) | 340 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other L-Series (L04–L290) models
Is your product missing?
Request received. We will proceed within 72 hours.