Lubricated rotary screw compressor
Gardner Denver L132
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 834.9 acfm110 psig (≈ 7.6 bar)
- Power
- 180 hp132 kW
- Type
- Fixed speed
- Manufacturer
- Gardner Denver
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
60 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 834.9 acfm | ≈ 23.64 m³/min |
| 130 psig (≈ 9 bar) | 784.2 acfm | ≈ 22.21 m³/min |
| 190 psig (≈ 13.1 bar) | 652 acfm | ≈ 18.46 m³/min |
50 Hz
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 807.3 acfm | ≈ 22.86 m³/min |
| 145 psig (≈ 10 bar) | 750.8 acfm | ≈ 21.26 m³/min |
| 190 psig (≈ 13.1 bar) | 656.2 acfm | ≈ 18.58 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Atlas Copco GA 132 | 848 cfm | 125 psig (≈ 8.6 bar) | 175 hp | Worldwide |
| ELGi EG 132P | 860 cfm | 8 bar (≈ 116 psig) | 175 hp | Worldwide |
| Kaeser DSD 240 | ≈ 888.2 cfm | 7.5 bar (≈ 109 psig) | ≈ 177 hp | Worldwide |
| Sullivan-Palatek SP25-200 | 933.8 acfm | 125 psig (≈ 8.6 bar) | 200 hp | North America |
| Sullair LS132 (CE) | ≈ 893.5 cfm | 8 bar (≈ 116 psig) | ≈ 177 hp | Europe / international |
| ALUP LARGO 110 | ≈ 652.6 cfm | 8 bar (≈ 116 psig) | 150 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other L-Series (L04–L290) models
Is your product missing?
Request received. We will proceed within 72 hours.