Desiccant dryer
Hankison HHL 7101
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 4,179 SCFM7,100 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (cycle 10 min) / -70 °C (cycle 4 min)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Hankison
- Conditions
- ISO 7183 (7 bar(g), 35 °C)
- Voltage
- 95-240/1/50 · 95/240/1/60 (tel quel)
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Hertz Kompressoren HDA 7200 | 4,238 SCFM7,200 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Champion CDT4100 | 4,100 SCFM≈ 6,966 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Gardner Denver DGH4100 | 4,100 SCFM≈ 6,966 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
| Kaeser KAD 4100 | 4,100 SCFM≈ 6,966 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
| Ingersoll Rand D6800ILA | ≈ 4,002 SCFM6,800 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| OMI HLA 6800 Pro | 4,002 SCFM6,800 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Aircel AHLD-4000 E | 4,000 SCFM≈ 6,796 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 6300 | 4,000 SCFM6,300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HHL (international) models
Is your product missing?
Request received. We will proceed within 72 hours.