Desiccant dryer
Hankison HHL 271
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 159 SCFM270 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (cycle 10 min) / -70 °C (cycle 4 min)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Hankison
- Conditions
- ISO 7183 (7 bar(g), 35 °C)
- Voltage
- 95-240/1/50 · 95/240/1/60 (tel quel)
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| BEKO Technologies XCp 160 | 160 SCFM≈ 272 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL160 | 160 SCFM270 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Gardner Denver XGHL160 | 160 SCFM270 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL160 | 160 SCFM270 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Sullivan-Palatek SPDPR 160 | 160 SCFM≈ 272 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| ZEKS 160ZPB | 160 SCFM≈ 272 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| OMI HLA 275 Pro | 162 SCFM275 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Kaeser KAD 165 | 165 SCFM≈ 280 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HHL (international) models
Is your product missing?
Request received. We will proceed within 72 hours.