Desiccant dryer
Hankison HHL 901
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 530 SCFM900 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (cycle 10 min) / -70 °C (cycle 4 min)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Hankison
- Conditions
- ISO 7183 (7 bar(g), 35 °C)
- Voltage
- 95-240/1/50 · 95/240/1/60 (tel quel)
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Ingersoll Rand D900ILA | ≈ 530 SCFM900 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatech PH 530 HE | ≈ 530 SCFM900 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Atlas Copco CD 250+ | 530 SCFM900 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| OMI HLA 900 Pro | 530 SCFM900 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Quincy QHD-530 | 530 SCFM≈ 900 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Altec AIR MHR520 | 520 SCFM≈ 883 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Aircel AHLD-500 E | 500 SCFM≈ 850 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Champion XCHL500 | 500 SCFM852 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HHL (international) models
Is your product missing?
Request received. We will proceed within 72 hours.