Desiccant dryer
Hankison HHL 141
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 82 SCFM140 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (cycle 10 min) / -70 °C (cycle 4 min)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Hankison
- Conditions
- ISO 7183 (7 bar(g), 35 °C)
- Voltage
- 95-240/1/50 · 95/240/1/60 (tel quel)
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| BEKO Technologies XCp 80 | 80 SCFM≈ 136 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MDA 130 | 80 SCFM130 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Sullivan-Palatek SPDPR 80 | 80 SCFM≈ 136 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Quincy QMOD00085 | 85 SCFM≈ 144 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Hertz Kompressoren HDA 130 | 77 SCFM130.2 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Deltech DHDM 88 | 88 SCFM≈ 150 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification NDL 100N | 88 SCFM≈ 150 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Parker DME040 | 88 SCFM149 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HHL (international) models
Is your product missing?
Request received. We will proceed within 72 hours.