Desiccant dryer
BEKO Technologies ACC 8
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 8 SCFM≈ 14 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (flow at -100 °F also stated)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT ACC
- Voltage
- 12-24 VDC / 100-240 VAC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Parker DAS3 | 8 SCFM13.6 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Quincy QMOD00008 | 8 SCFM≈ 14 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Atlas Copco CD 3.5 | 7.4 SCFM12.6 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Ingersoll Rand DA15IM | ≈ 9 SCFM15 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Deltech DHDM 9 | 9 SCFM≈ 15 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 9 | 9 SCFM≈ 15 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Kaeser DC-HF 2.0 | 7 SCFM≈ 12 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| ZEKS 9ZMA | 9 SCFM≈ 15 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT ACC models
Is your product missing?
Request received. We will proceed within 72 hours.