Desiccant dryer
BEKO Technologies ACC 56
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 55 SCFM≈ 93 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (flow at -100 °F also stated)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT ACC
- Voltage
- 12-24 VDC / 100-240 VAC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Quincy QMOD00055 | 55 SCFM≈ 93 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Atlas Copco CD 25+ | 53 SCFM90 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Nano Purification NDL 080N | 53 SCFM≈ 90 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Parker DME025 | 53 SCFM90 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Pneumatech PH 55 HE | 53 SCFM90 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Pneumatic Products (SPX) 60CDA | 57 SCFM≈ 97 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Hankison HHL 91 | ≈ 53 SCFM90 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Ingersoll Rand DA100IM | ≈ 59 SCFM100 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT ACC models
Is your product missing?
Request received. We will proceed within 72 hours.