Desiccant dryer
BEKO Technologies ACC 10
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 10 SCFM≈ 17 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (flow at -100 °F also stated)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT ACC
- Voltage
- 12-24 VDC / 100-240 VAC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Chicago Pneumatic CPADM-10 | 10 SCFM≈ 17 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD10 | 10 SCFM20 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification NDL 030 | 10 SCFM≈ 17 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Parker DAS4 | 10 SCFM17 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Quincy QMOD00010 | 10 SCFM≈ 17 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Sullair DMD-10 | 10 SCFM≈ 17 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
| Deltech DHDM 9 | 9 SCFM≈ 15 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 9 | 9 SCFM≈ 15 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT ACC models
Is your product missing?
Request received. We will proceed within 72 hours.